Iridex OcuLight Symphony, Operator'S Manual

Page: 24 / 68

18
OcuLight Symphony Operator Manual
31144C-EN
UL
LISTED
86Z4
MEDICAL
EQUIPMENT C
11
5
Foot
Switch
STOP
Remote
Interlock
4
P
U
S H
R
E -CI
R
K
-
I
T
LE LASER RADIA
TION
N EXPOSURE T
O
ERED RADIA
TION
DUCT (EN60825-1:1998)
ODUCT 21 CFR 1040
Po = 2 mW
= 630-670 nm
If desired, connect a remote interlock switch
As a safety feature, a remote interlock switch may be installed, for example
a switch that disables the laser whenever a treatment room door opens
while the console is in the Treat mode. If you will be using a remote
interlock switch, install a remote interlock switch to each console as
described:
Connecting to the OcuLight SLx console
Attach the two wires connecting the door switch to the remote interlock
plug in place of the shorting connection.
Insert the remote interlock plug (either by itself or attached to a remote
interlock switch) into the remote interlock port.
If the remote interlock plug is not properly connected, when you turn on
the OcuLight SLx console,
No Remote Interlock displays on the console
status panel.
Connecting to the OcuLight GLx/TX console
Remove the factory installed wire and in its place attach the two wires
leading to your own switch.
If the remote interlock switch is not properly connected, when you turn on
the OcuLight GLx or TX console,
No Remote Interlock
displays on the
console status panel.