Irbit Motorcycle Factory Gear Up 2003, Owner'S Manual

Page: 37 / 99

37
IGNITION TIMING
To set the ignition timing, proceed as follows:
-Match the first mark on the flywheel with the center marks on the engine flywheel window.
-Loosen the fastening screws of the microprocessor unit and turn it counterclockwise until it stops.
-Apply power to the ignition system by switching the ignition on.
-Slowly turn the ignition unit clockwise, (the LED should be on)
-Stop turning the microprocessor unit when the LED turns off.
-Tighten the fastening screws of the microprocessor unit and switch the ignition off.