Irbit Motorcycle Factory Gear Up 2003, Owner'S Manual

Page: 91 / 99

91
SERVICE COUPON NO. 9. 20,000 KM
(To be performed between 19,900 to 20,100 km)
Date Odometer reading km.
1. Change engine oil and filter. (See Lubrication List, chapter 11)
2. Change transmission oil. (See Lubrication List, chapter 11)
3. Change final drive oil. (See Lubrication List, chapter 11)
4. Inspect air filter element.
5. Torque cylinder head stud nuts.
6. Adjust valve tappet clearance.
7. Change oil in front fork shock absorbers (on telescopic fork models)
8. Replace the spark plugs and inspect ignition leads.
9. Replace in-line fuel filters.
10. Check:
A Carburetors while idling for synchronous operation
B Check steering column bearings & adjust if required.
C The condition and action of the brakes, lubricate the brake shoe fulcrum pins and cams.
D The tension of wheel spokes. Adjust if necessary.
E The toe-in and camber angle of the motorcycle and sidecar.
F Electric wiring. Tighten connections if required.
G Fasteners for proper tightening.
11. Repack the grease in wheel bearings, adjust the bearings.
12. Lubricate:
A Foot brake pedal shaft
B Hinges of foot brake pedal shaft and linkage.
C Lever pins and thimbles of clutch and front wheel brake control cables.
D Drive shaft splines
13. Check battery electrolyte level.
14. Check tires, tread depth greater than 3/32”
14. Check the timing.
The maintenance above has been performed as described.
Owner’s Signature Service Technician’s Signature
The maintenance above has been performed as described.