iQTS244
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
Accessories can be purchased from your local
iQ Power Tools dealer. Call 888-274-7744 or visit
our website at iqpowertools.com.
INSTALLING THE X-STAND (optional accessory)
With the saw resting on the wheels and back feet.
Hold the X-Stand as shown. Connect hooks on
X-Stand (A) over upper crossbar of saw tube frame.
Put slight pressure on transport handle (A) while
pushing X-Stand down (B) until lower cross bar of
saw tube frame engages with X-Stand lock pin.
1.
2.
Lower the transport handle by pulling transport
handle lock pin (A) then pushing down on transport
handle (B).
With X-Stand attached lifting the machine to its
upright operating position. As shown below, with left
foot placed near cutting head (A) with left hand lift
on cutting head handle while guiding upward rotation
with right hand on transport handle (C).
Note:
Before
lifting allow approximately 6ft. / 2m to lift and rotate
the machine to its upright operating position.
3.
4.
3.2
12.1
A
A
B
A
B
B
A
C