9
YLS-K
•
Never send the product back to IPG Laser GmbH without enclos-
ing a valid RMA number (Return Material Authorization). The
RMA number can be obtained from the Service department of IPG
Laser GmbH.
•
The costs for repair of the product will be invoiced to the cus-
tomer if the product or repair is not covered under the warranty.
•
Articles that are sent back to IPG Laser GmbH upon request must
be shipped in a suitable container / packaging.
Protection class
Voiding of the warranty
The specified IP protection classes apply only for the
closed cabinet and with use of the connections and
couplings provided.
ð
Always keep the cabinet closed during opera-
tion.
ð
Do not make any mechanical alterations to the
connections.
The IP protection classes specified in the specifications apply to the
electrical and electronic components of the product. Mechanical
changes can lead to a lower protection class, thereby voiding the war-
ranty.
Reservation of
the right to make
amendments
IPG Laser GmbH reserves the right to make changes to the design or
construction of its products at any time without any obligation to imple-
ment or install these changes in units purchased at an earlier point in
time.
1.5
Formal information about the operating
manual
IPG Laser GmbH grants no usage rights, either directly or indirectly, un-
der a patent or other industrial property rights or copyright on the ba-
sis of the use of information provided in this document.
Copyright 2018 IPG Laser GmbH. All rights reserved. It is prohibited to
reproduce this publication, share it with third parties, store it in re-
trieval systems or adapt it in any way whatsoever without the express
written authorization of IPG Laser GmbH.
IPG Laser GmbH believes that the information provided is correct and
reliable. IPG Laser GmbH provides no warranty of any kind, except with
regard to the information in this document, including the assurance of
suitability for general or specific use. Furthermore, IPG Laser GmbH ac-
| General information