101
YLS-K
In this tab (see figure above), you can select and download the created
log files. The log files are saved in the laser memory. In event of a fault,
you can download the corresponding files to your computer and send
them to the competent IPG service department.
To download the files, proceed as described in the section
8.8.7 Power supply tab
Figure 60:
Power supply tab
On this tab (see previous figure), the actual values as well as status mes-
sages and alarms of the installed laser power supplies are displayed. A
detailed description of the individual status messages and alarms as
well as instructions for eliminating the faults can be found in the appen-
dix under
Messages of the Power Supply tab
.
The displayed actual values are described in the table below.
Actual values
Description
Current
Output current of the power supply
Voltage
Output voltage of the power supply
Temperature
Temperature of the power supply
Status
Status of the power supply (internal code IPG)
Table 15:
Power supply tab description
| LaserNet software