Product Overview
-
4
-
Interface & Button Description
RESET
Pressing it for over 7 seconds restores the device to its factory defaults.
PoE
LAN/PoE (802.3at) port. You can connect it to a computer, or an IEEE
802.3at-compliant PoE switch, etc.
PWR
Used for connecting to the included power adapter for power supply.
1.3.2 Label
The label is attached on the bottom of the device as shown below:
General descriptions of the label:
(1) Default login IP address of the AP. When the AP is not managed by an AC (access controller), you can use this
IP address to log in to the web UI of the AP.
(2) Default login user name and password of the AP Web UI.
(3) Power input of the AP. You can use the included power adapter to power on the AP.
（
1
）
（
2
）
（
3
）
