More Features
-
46
-
VLAN
changed, you need to re-connect to the new manage VLAN to manage the AP.
PVID
Belonging VLAN ID of the LAN port of the AP. The default is 1. Once QVLAN is enabled, the
LAN port of the AP will be the Trunk port.
2.4G SSID
Display SSIDs which have been enabled at 2.4GHz on the AP.
5G SSID
Display SSIDs which have been enabled at 5GHz on the AP.
VLAN ID
Configure the corresponding SSID’s VLAN ID. It is 1000 by default. You can specify a value
between 1 and 4094.
When the VLAN is enabled, wireless port of the SSID can be regarded as an Access port. Its
PVID and VLAN ID are the same.
Different data, tagged or untagged, will be processed in different ways, after being received or sent by ports of
different link types, which is illustrated in the following table:
Port Type
Receiving Packets
Sending Packets
Receiving Tag Packets
Receiving Untag
Packets
Access
Packets
will
be
forwarded to other ports
in
the
corresponding
VLAN according to the
VID in the Tag.
Data will be forwarded
to other ports in the
corresponding
VLAN
according to PVID on
this port.
Packets will be sent after removing the
VLAN tag.
Trunk
VID
＝
PVID: Packets will be sent
after removing the VLAN tag.
VID
≠
PVID: Packets will be sent
directly.
QVLAN Application Example:
【
Requirements
】
WiFi needs to be covered in a hotel. People in a hotel are generally classified into three kinds: hotel executives,
hotel staffs and guests. Hotel executives can access both the Internet and internal network in the hotel. Hotel staffs
can only have the access to internal network in the hotel. Guests can only access the Internet via Ethernet cables or
wirelessly.