More Features
-
21
-
Parameters Description:
Item
Description
MAC address
AP's MAC address of LAN port.
The primary SSID of the AP is IP-COM_XXXXXX, and XXXXXX is the last six
characters of this MAC address.
Address Mode
Select the AP's address mode to obtain IP info. It's
Static IP
by default.
Static IP
: Configure the AP's IP info manually, including IP address, subnet mask,
gateway and DNS server.
Dynamic IP
: The AP will automatically get IP info, including IP address, subnet mask,
gateway and primary/secondary DNS server, from the existing DHCP server.
Tip
In
Dynamic IP
address mode, after the AP get IP info successfully, you need log in to the
existing DHCP server' UI to check the AP's IP address in the DHCP Client List page. And
re-log in to the AP's UI with the obtained IP address.
IP address
It's the AP's IP address for management. The computer in the same LAN with the AP can log
in to the AP's UI with this IP address.
In general, it is in the same network segment with the LAN IP address of gateway.
Tip
If the AP's IP address has changed, you need to change your PC's IP address to one that is
different from the AP but on the same network segment, and re-log to AP's UI with AP's
new IP address.
Subnet Mask
AP's subnet mask of IP address. It's 255.255.255.0 by default.
Gateway
In general, AP's gateway is the LAN IP address of the uplink router.
Primary
DNS
server
You need to enter the correct primary DNS IP address to ensure the AP's Internet service.
If the uplink router is a DNS agent, this primary DNS server address can be the LAN IP
address of the uplink router.
If not, please enter the correct DNS server IP address.
Secondary DNS
server (optional)
The secondary DNS server address is optional. If you have got two DNS server IP address,
you can enter one of them here.
Device Name
By default, the AP's device name is the AP's model. It is recommended to change the device
name.
