More Features
-
40
-
By default, WMM is enabled and three application modes are available:
Optimized for Throughput (Concurrent Users <=10): If the number of Concurrent Users is less than 10,
“Optimized for Throughput” template is recommended.
Optimized for Capacity (Concurrent Users >=10): If the number of Concurrent Users is more than 10,
“Optimized for Capacity” template is recommended.
Custom: You can customize the WMM EDCA parameters. For more details, see description below.
Description for WMM EDCA:
If Custom is selected, the following page will pop-out.
WMM prioritizes traffic according to four Access Categories (AC) – voice (AC_VO), video (AC_VI), best effort
(AC_BE), and background (AC_BK). If you are not familiar with these parameters, leave the default setting
unchanged.
Parameters Description:
Item
Description
No ACK
No ACK is a kind of policy to be used only while the network communication is in good
condition with little interference. To some extent, No ACK can improve transmission
efficiency. But, if the communication quality is not good, packets dropping may increase.
