More Features
-
18
-
Configuration Steps
:
Assume that AP2 is the remote router as the topology displays.
1.
Log in to the AP2's UI and note down the corresponding info. Assuming AP2's info is as below:
SSID
Security Mode
Key (WiFi password)
IP address
IP-COM_2
Mixed WPA/WPA2-PSK
86754321
192.168.0.254
2.
Log in to the AP1's UI and set its IP address to one that is different from AP2 but on the same network segment,
say, 192.168.0.253. For details, please refer to
3.3.1 LAN Setup
.
3.
Re-log in to the AP1's UI with the new IP address, click
Quick Setup
, select
AP Client Mode
and click
Enable
Scan
.
4.
Select the AP2's SSID, IP-COM_2, in the list.
5. Security Key
: Enter AP2's Key (WiFi password).
6.
Click
Save
to apply your settings.
After AP1 has bridged to AP2 successfully, wireless clients, such as smart phones, can scan and connect to AP1's
SSID, IP-COM_0E6AD9 in this case, for Internet access.
