eZ-Analyst
889691
Edit Menu 4-53
Display for Arbitrary Wave, following an ASCII Data Import
The ASCII import display has the same
Scale
,
Offset, First Samp
and
Num Samps
entry fields seen in the
eZ-Analyst raw data import display. Additionally there are entry fields for
Range Selection
and
Acquisition
Sample Rate
. Also displayed are the Maximum and Minimum data values in the imported data.
Unlike eZ-Analyst raw data, ASCII data contains no information about how the data was acquired. Because
of this, some information about the data has to be manually entered by the operator. For example,
eZ-Analyst needs to know what the +/- Full Scale Range was when the data was acquired. The software
also needs to know the sample rate that was used to acquire the data.
The
Full Scale Range
can be either manually entered, or automatically set by selecting the Maximum and
Minimum data points imported from the file.
The
Waveform Modifiers
operate the same for ASCII data as Raw data. Enter the time value to playback the
data, and make the selections needed to make the playback repeat or not.
