Iomega StorCenter px2-300d User Manual Download

Page: 167 / 179

Hardware Management

155

Adding New Drives to Your Iomega StorCenter px2-300d

Note

: You can add only one drive at a time on a px2-300d. One drive is required for booting up. If

you are using an Iomega StorCenter ix2-dl, you can replace both drives.

To install new hard drives in your px2-300d:

Before installing a new hard drive in your px2-300d, check the hard drive compatibility list
online at

www.iomega.com/support

for approved and supported hard drive brands and

models.

Mount the drive carrier containing the new drive in an available slot.

A confirmation dialog box displays as soon as the px2-300d detects the new hard drive. Click

Yes

to proceed.

Note:

All data on the drive is deleted.

You are re-directed to the Iomega StorCenter px2-300d Console.

Access the

Drive Management

page.

Your px2-300d displays the new hard drives in the bays they are mounted in.

To create a RAID Array, you must install a minimum of two hard drives. The same
confirmation dialog box displays. Click

Yes

to proceed.

Note:

You can create a Storage Pool using one hard drive if desired. You will not have any

RAID protection options and can only select

None

from the RAID dropdown list while

configuring your Storage Pool.

When all new drives are detected, click

Add a Storage Pool

Complete the

Storage Pool configuration options

and select the desired drives on which to

build the Storage Pool by checking the boxes next to them. All drives in a Storage Pool must
be the same model, manufacturer, and capacity.

Allow a few minutes for the RAID array and Storage Pool to build. When complete, the
Storage Pool status displays on the Drive Management page.

Summary of Contents for StorCenter px2-300d




















































































































































































Search results

Summary of Contents for StorCenter px2-300d

Reviews:

Related manuals for StorCenter px2-300d

Brands by name

Popular brands

Iomega StorCenter px2-300d, User Manual

Search results

Summary of Contents for StorCenter px2-300d

Reviews:

Related manuals for StorCenter px2-300d

Brands by name

Popular brands