I-O 2677e Ethernet Display User s Guide
Appendix A
66
•
0052
The remote control unit detected an error.
• Recovery must be made at the remote control unit.
•
0054
The remote control unit received invalid commands from
the system during communication.
• Recovery must be made at the remote control unit.
•
0072
The key pressed is not valid in the current area of the
screen.
• Recovery must be made at the remote control unit.
•
0097
On-line verification test not supported by the host
program
we’re trying to run.
• Press RESET and continue to use display module
without performing the verification tests
•
0099
An error occurred before, after, or during the sign-on.
• Press RESET and if error occurs again,
contact your system administrator.
Record/Playback Error Codes
The following error codes indicate a problem with the Record/Playback feature on the 102/103-key or
122-key keyboard. These codes appear in the center of the status line.
Error Code
Solution
•
9000
Bad keyboard or keyboard not attached
•
Check keyboard connection. Repair / Replace keyboard.
•
9001
Recordable keystroke memory is full (there is no room to enter
additional keystrokes).
•
Press RESET and then RECORD to exit. Erase a recorded
keystroke sequence for one or more CMD keys to clear
memory for the new keystroke sequence.
