I-O 2677e Ethernet Display User s Guide
Troubleshooting
62
Error Code
Solution
•
0000
The Help key was pressed. Either no error code was
displayed, or the error was issued by a program that does
not support the Help key.
•
Press RESET and continue entering information, or refer
to previous error and perform action required.
•
0001
The host or remote workstation control unit is slower than
the keystrokes entered. The last character you entered was
not recognized.
•
Press RESET and continue entering data.
•
0002
The host system or remote workstation control unit
received an invalid key code.
•
Press RESET and continue entering data. If the error
still occurs, report the problem to your system administrator.
•
0003
You pressed an invalid key after pressing and holding the
<Alt> key.
•
Press RESET.
•
0004
You attempted to enter data into a field that does not
allow keyboard input.
•
Press RESET
•
0005
You attempted to enter data when the cursor was not in an
Input field. Data cannot be entered in a protected area of
the display.
• Press RESET. Move the cursor to a valid input field.
•
0006
•
0007
After pressing the SysReq/Attn key, and before pressing
the <Enter> key or the RESET key, you pressed an invalid
key.
•
Press RESET.
At least one field on the display requires that you enter
data before the display can be changed or moved. (The
cursor goes to the first character position of the first
mandatory entry field.)
• Press RESET and enter the required data.