I-O 2677e Ethernet Display User s Guide
Printer Operation
53
1.
If there are only a few commands that need to be reset, use the Z command to reset the feature
to default.
Example:
&%Z07,0
Restores Print Orientation to COR with host override allowed.
2.
If there are numerous parameters that need to be reset, it may be easier to delete the printer
from the ProEdge Connection Manager and reconfigure the printer.
3.
An aggressive approach to restoring defaults if you want to remove everything, displays as well
is to go to the Windows Start Button in the lower left corner and select Settings, Control Panel,
System and check the Reset the terminal to factory-default property settings.
C
AUTION
:
U
SING
S
YSTEM RESTORE WILL RESET THE
D
EVICE
N
AME AND
D
ESCRIPTION AS WELL
AS DELETE ANY DISPLAY OR PRINTER SESSIONS FROM THE
C
ONNECTION
M
ANAGER
.
This command can be used to print out the active configuration selections.
Example:
&%Z98,1
Prints out the active setup selections for review
Another option for printing out the active setup selections for review is to go to the Connection Manager
and select the I-O 5250 Printer Control Panel. From the Control Panel, select Printer Test which will
print a test page and a configuration page.
Command No. 99: Save Current Settings
This command will permanently save all current settings specified through Host Download Commands.
Value Description
0
Saves the current configuration settings
Example
:
&%Z99,0 This command causes the I-O 5250 printer module to save
the settings.
C
AUTION
:
H
OST DOWNLOAD COMMAND
Z99,0
IS REQUIRED IF YOU WANT THE
CURRENT HOST
D
OWNLOAD COMMANDS SAVED FOR FUTURE SESSIONS
.
N
OTE
:
U
PON ENDING THE PRINTER SESSION
,
IF YOU SAVED THE CONFIGURATION USING
&%99,0,
YOU
WILL RECEIVE A MESSAGE
:
C
ONTROL
P
ANEL OR
H
OST
D
OWNLOAD CONFIGURATION CHANGES HAVE
BEEN MADE
.
D
O YOU WANT TO SAVE THE CHANGES
?
Y
OU MUST SELECT
YES
IF YOU WANT TO SAVE THE DOWNLOADED CONFIGURATION CHANGES FOR
FUTURE USE
.
I
F YOU DO NOT SAVE THE CONFIGURATION USING
&%Z99.0,
THE CHANGES WILL BE ACTIVE AS LONG AS
THE PRINTER SESSION IS ACTIVE
,
BUT YOU WILL NOT RECEIVE THE SAVE CHANGES MESSAGES ON EXIT
.