Goodrive800 Pro Series Inverter Unit Hardware Manual
Mechanical installation
202202 (V1.0)
32
No.
Name
1
Input copper bar
2
DC fuse
3
Magnet ring assembly
4
Unit-top fixing assembly (unit guide included)
5
Unit-bottom fixing plate
6
(+) busbar and busbar clamp
7
(-) busbar and busbar clamp
8
Busbar clamp support
9
Side air baffle assembly (with sealing sponge)
10
Output copper bar
11
Fast connector female end
12
Bottom outgoing hole
3.3.5.6
Unit installation and replacement
Assembly procedure
Step 1
Insert the unit entry/exit guide rail into the slot of the cabinet front bottom beam. See Figure 3-22.
Step 2
Push the unit into the cabinet.
(1) Align the unit casters to the rail. See Figure 3-23.
Figure 3-22 Unit entry/exit guide rail placement
Figure 3-23 Unit placement
(2) Push the unit into the cabinet.
Note:
Since the inverter unit barycenter is too high, use the auxiliary rope for installation to prevent the
inverter unit from rollover during the push-in or push-out.
Cabinet
Unit entry/exit
guide rail
Align the unit casters to the
rail.