Goodrive800 Pro Series Inverter Unit Hardware Manual
Mechanical installation
202202 (V1.0)
20
Figure 3-6 Unit placing requirements
>
Note the following to fold or unfold the anti-tipping stand:
To unfold the anti-tipping stand, pull down the anti-tipping stand to press the spring, wrap it around the
restraining pin and rotate it 180° to snap into the slot as shown in Figure 3-8.
To fold the anti-tipping stand, rotate the anti-tipping stand in the slot by 180° to restore the pressed
spring back to its original state to clamp the anti-tipping stand, as shown in Figure 3-9.
The restraint pin ensures that the anti-tipping stand will not unfold due to shaking. The anti-tipping stand
folds, as shown in Figure 3-7.
Figure 3-7 Unit-bottom structure
Anti-tipping stand
Stand slot
Restraint spin