Goodrive800 Pro Series Inverter Unit Hardware Manual
Mechanical installation
202202 (V1.0)
19
anti-tipping stand at the lower front of the unit. Figure 3-4 shows the anti-tipping stand location.
Figure 3-4 Unit lifting
Lifting ring
Anti-tipping stand
Note: Use the lifting ring on the top of inverter unit for lifting and moving. Never apply force to the
positive or negative bus terminals.
Figure 3-5 Unit-top structure
Lifting ring
Never apply force
The inverter unit has a high center of gravity and must be placed on a flat and solid ground with sufficient
support strength and a tilt angle of less than 5°. Failure to comply with this requirement will cause the
inverter unit to tip over or topple over, which may result in serious injury or property damage.