INVENTIA MT-101, User Manual

Page: 86 / 165

83
Default
value - Status
Comments - n/a
8.2.7.2.1.1.5. Buffer address
Function - Defines start address of internal registers space sent in
transmission triggered by defined rule
Data type - number
Range - 0....2047
Default
value - 64
Comments - n/a
8.2.7.2.1.1.6. Buffer size
Function - Defines size of internal registers space sent in transmission
triggered by defined rule
Data type - number
Range - 1....512
Default
value - 16
Comments - n/a
8.2.7.3. CLIP calls
CAUTION!
This option is not supported starting with v 1.42 of the MT-101 module's
firmware.
The description is solely to support the legacy firmware.
The term „CLIP call” describes attempts to establish a phone connection to a defined
number.
This connection is not supposed to be picked up by the recipient. Identification of sending
module's phone number is enough to convey the alert. The meaning of alert should be
agreed upon. Notice that recipient does not have to be a GSM network subscriber but
must have a phone able to identify and display caller ID.
The function corresponds to sending 1 bit of information triggered by event occurrence
free of charge.
The list of rules holds max. 32 rules allowing to establish a connection with selected
phone number.
Adding a new position is done in the context menu by right-clicking mouse while one of
positions on the list is highlighted.