24
6.2. First configuration
First configuration of
MT-101
is necessary for setting up basic parameters making logging
to GSM network possible and, optionally, servicing GPRS.
NOTICE!
Since a new module or a module configured for other circumstances may
not have necessary data for proper login to GSM network, it is necessary
to perform the first configuration in local mode by serial RS232 cable
connected to Port 1
To configure the module, connect it via RS232 cable to a computer running
MTManager.
Comprehensive information about installation, use and attachment of
MTM
program to
configured modules can be found in
MTM User Manual.
Logging into GSM/GPRS network requires basic information about the SIM card in use and
optionally about the APN that the module is going to operate within when GPRS mode is
turned on.
The parameters are:
In
General
group:
PIN code for SIM card
insert PIN code of the SIM card intended for the module, unless the card is
configured not to ask for PIN code.
Use GPRS
Yes
- if
SMS and GPRS packet transmission is intended
No
- if the module is to work in SMS mode only.
In
GPRS
group - visible if
Use of
GPRS
is set to
Yes
:
APN Name
insert name of APN, in which GPRS transmission is to take place.
APN User Name
insert user name (if required by Network Operator)
APN login password
insert password (if required by Network Operator)
NOTICE!
Upon each writing of new configuration into MT-101, the module performs
full RESET
Summary of Contents for MT-101
Page 1: ......
Page 129: ...126 11 7 Drawings and dimensions ...
