INVENTIA MT-101, User Manual

Page: 80 / 165

77
Comments - since IP address of recipient is selected from list of friendly
names, assigning unambiguous unique descriptive names is
beneficial
8.2.6.7. MT2MT Buffer
MT2MT Buffer enables creation of system where modules may exchange information
(internal registers) with each other. Using buffer requires activation and defining register
space where exchange is going to take place. More in chapter Internal Resources/MT2MT
Buffer.
8.2.6.7.1. Active
Function - defines state of employing MT2MT Buffer
Data type - selection list
Range - Yes
MT2MT Buffer active
No
MT2MT Buffer inactive
Default
value - No
Comments - n/a
8.2.6.7.2. Sending to PORT2
Function - Defines whether received event data buffer has to be sent to
PORT2
Data type - selection list
Range - Yes
Received data will be sent
No
Received data will not be sent
Default
value - No
Comments - This parameter has no influence on events with status that are
always sent to PORT2
8.2.6.7.3. Buffer address
Function - Defines start address of internal register space used for events
reception.
Data type - number
Range - 0....999
Default
value - 64
Comments - received events registers laying outside defined space are not
copied.
8.2.6.7.4. Buffer size
Function - Defines the size of internal registers space used for events
reception.
Data type - number