4
5
U S E R A N D S A F E T Y I N S T R U C T I O N S
U S E R A N D S A F E T Y I N S T R U C T I O N S
Ventilation system iV-Smart+ / sMove controller
•
Operating instructions
Ventilation system iV-Smart+ / sMove controller
•
Operating instructions
1
User and safety instructions
Thank you for purchasing this high quality product from inVENTer!
Your inVENTer product is an exclusive system for the ventilation of your living premises, which
DGGLWLRQDOO\FRQWULEXWHVWRLPSURYLQJHQHUJ\HႈFLHQF\YLDWKHSULQFLSOHRIKHDWUHFRYHU\2XU
inVENTer ventilation units are made to the highest quality standards in Germany using premium
materials.
This section provides an overview of the basic safety precautions for safe and proper operation
of your ventilation unit.
1.1
User information
Concept of safety instructions
The safety and warning instructions in these operating instructions have a uniform structure
and are marked with a symbol on the left side of the instruction. A signal word in front of the text
also indicates the hazard level. If several hazard levels exist, the highest level safety instruction
is always used.
The safety and warning instructions contain the following information.
SIGNAL WORD: Type and origin of the hazard.
Possible consequences of the hazard!
Measures to avoid the hazard.
A signal word indicates the severity of the potential hazard unless the preventative measures
are taken.
WARNING
indicates: Imminent danger of serious injury or death.
CAUTION
LQGLFDWHV,PPLQHQWRUSRVVLEOHULVNRIPLQRUVLJQL¿FDQWLQMXU\
NOTICE
indicates: Imminent or possible damage to property due to an adverse event/state.
If you see this sign, ensure you observe the described measures to prevent possible hazards
and/or damage.
Other symbols used in this documentation
In addition to the safety instructions, the following symbols are used:
A
TIP
symbol indicates practical and useful tips for handling your ventilation unit.
A tool symbol before an installation sequence lists any additional tools and materials
required for the described task.
A
Red frame
surrounding a graphic indicates that the interior wall is shown.
Ź
Action required:
WKLVUHTXLUHV\RXWRSHUIRUPDVSHFL¿FDFWLRQ
Ö
Check the results:
this requires you to check the results of the action you have performed.
Safety instructions
These operating instructions are part of the ventilation unit and must be permanently available.
When handing the equipment/system to a third party, the operating instructions must be handed
over also. Please read the operating instructions carefully before operating or cleaning the
system and observe all information provided in this section about operating, cleaning and
maintaining your system. Also note the safety instructions that precede the described handling
instructions. Non-observance of safety warnings could result in injury and/or property damage.
Intended use
The ventilation unit is designed to ventilate dwellings and similar residential spaces.
It is controlled via an inVENTer system controller.
General instructions
• Use the equipment/system exclusively for the applications that are described in this docu-
mentation and only in conjunction with components that are recommended, authorised and
GHVFULEHGE\LQ9(17HU*PE+LQWKLVGRFXPHQWDWLRQ&KDQJHVRUPRGL¿FDWLRQVWRWKHHTXLS
-
ment/system are not permitted.
• Your ventilation unit is exclusively designed for use in ambient temperatures between
-20 and 50 °C.
• Proper operation and cleaning/maintenance are required for trouble-free and safe operation
of the equipment/system.
• WARNING:
,QVWDOODSUHVVXUHPRQLWRULQURRPVZLWKRSHQÀXHV,QDQ\FDVHDLUH[FKDQJH
PXVWEHDVVXUHGWREHVXႈFLHQWIRUWKHYHQWLODWLRQXQLWVDVZHOODVWKH¿UHSODFH
Consult your chimney sweeper and/or building planner before installation!
• NOTICE:
Do not place the unit near radiators, room thermostats or in the immediate vicinity/
above sensitive paintings or furnitures.
• NOTICE:
Maintain a minimum circumferential clearance of 250 mm to avoid the mixing of
outdoor air and exhaust air.
• NOTICE:
Observe the predetermined minimum distance of 300 mm in front of the ventilation
unit to ensure access to the unit and its components. Remove/avoid obstacles that hinder
access to, or removal of, the unit’s components.
Cleaning and maintenance
• CAUTION: Operation and/or maintenance of the ventilation unit and its controllers
must not be carried out by children and/or persons who are not fully capable of doing
so due to their physical, sensory or mental capabilities, inexperience or lack of knowl-
edge. Young children should be supervised to ensure that they do not play with the
device.
• NOTICE:
Your ventilation unit and controller have scratch-sensitive plastic surfaces. Do not
touch the inner cover with oily and/or dirty hands. Avoid contact with sharp or pointed objects,
e.g. rings.
• NOTICE:
Do not use strong cleaning agents or solvents. Use a soft, damp cloth to clean the
plastic surfaces.
• NOTICE:
Your inVENTer
®
ventilation unit operates with a protective low voltage and an
operating voltage of 6 – 16 V DC. The ventilation unit must not be connected directly to the
230 V power grid. It must
always be connected via a controller
.
• Before performing cleaning or maintenance tasks, disconnect the controller's power supply
and put on gloves.
