inVENTer iV-Smart+ sMove, Operating Instructions Manual

Page: 10 / 19

Z Z
Set output
The intensity of the ventilation can be adjusted continuously by moving the slide control, or
in four steps by touching the fan icons on the slide control. The fan icons on the slide control
indicate output levels 1
(25 %)
, 2
(35 %)
, 3
(50 %)
and 4
(100 %)
. They serve as a guide.
7KHQHZVHWWLQJWDNHVHႇHFWLPPHGLDWHO\VRWKDWDGMXVWPHQWVFDQEHPDGHSXUHO\E\OLVWHQLQJ
to changes in the sound level.
6HWWLQJWKHRXWSXWZLWKSUHGH¿QHGOHYHOV
Requirements:
The controller is in heat recovery or continuous
ventilation mode.
Ö
<RXKDYHVHWWKHSUHGH¿QHGRXWSXWOHYHO
Set continuous output adjustment
Requirements:
The controller is in heat recovery or continuous
ventilation mode.
Ö
You have set continuous output adjustment.
4.5 View hours run
The sMove controller comes with an integrated hours-run counter. The operating time is
displayed in days. The maximum displayable number is 4,000 days. One day corresponds to a
calculation period of 24 hours. There is no further split within these 24 hours.
The operating time is displayed as a 4-digit number.
(YHU\GLJLWEHJLQQLQJZLWKWKH¿UVWSODFHZLOOEHLQGLYLG
-
ually displayed by an indicator light to the left of the slide
control/pause button .
The indicator light to the left of the button corresponds to
the number 0.
The indicator lights to the left of the slide control corre-
spond to the numbers 1 (bottom) to 9 (top).
When the number is displayed, the end value will be
permanently lit. To simplify the numbering, a number of
running lights corresponding to the end value will move
towards the end value.
The display disappears between the individual numbers.
Requirements:
The controller is switched on.
Ö
You have requested the days of operation for the
controller.
Example
n , + o
Indicator light Digit
¿UVWSODFH
left of the pause button 0
second place End value: 4th indicator light to the left of slide control
4 running lights move to the end value
4
third place left of the pause button 0
fourth place End value: 7th indicator light to the left of slide control
7 running lights move to the end value
7
Ö
The controller has been in operation for 0-4-0-7 days (407 days).
18 19
O P E R AT I N G T H E S M O V E C O N T R O L L E R S O P E R AT I N G T H E S M O V E C O N T R O L L E R S
Ventilation system iV-Smart+ / sMove controller • Operating instructions Ventilation system iV-Smart+ / sMove controller • Operating instructions
Ź
Press the button with the symbol matching the
desired output level, e. g. level 3:
Fan output 100 % (level 4)
Fan output 50 % (level 3)
Fan output 35 % (level 2)
Fan output 25 % (level 1)
Ö
The indicator light to the left of the selected fan
icon will be illuminated.
Ź
3ODFH\RXU¿QJHURQWKHVOLGHFRQWUROIRUVHFRQG
Ö
The slide control is now active.
Ź
0RYH\RXU¿QJHURQWKHVOLGHFRQWUROWRWKHGHVLUHG
output level.
Ö
The indicator light to the left of the slide control
displays the output level set.
Ź
Press the and simultaneously for 10
VHFRQGVXQWLOWKHGLVSOD\OLJKWVVZLWFKRႇ
Ź
Note down the digits displayed.
Ź
Combine the digits into a number:
1XPEHULQVWSODFH ¿UVWGLJLWGLVSOD\HG
Number in 2nd place = second digit displayed
Number in 3rd place = third digit displayed
Number in 4th place = fourth digit displayed
0
1
9
.
.
.
Ö
•
1 sec s s s ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec ec
•
10 sec