inVENTer 1001-0200, Installation Instructions Manual

Page: 25 / 40

25
INSTALLATION AND ASSEMBLY
25 iV-Light ventilation unit | Installation instructions
4.6 Inserting the thermal accumulator insert
NOTICE
Do not store/stack the thermal accumulator insert outside the wall sleeve
as doing so will damage the thermal accumulator's ceramic.
• Insert the thermal accumulator immediately after removing it from the packaging.
Requirements:
• The external terminal is fitted.
► Remove the styrofoam disc from the wall sleeve.
► Insert the thermal accumulator from the interior into
the wall sleeve.
•
The handle points towards the interior.
•
The connecting cables protrude into the
interior.
► From the interior, slide the thermal accumulator
towards the external terminal as far as the end-stop
tape.
► Insert the inVENTron from the interior into the
wall sleeve so that you can reach the BUS plug
connection.
The narrow Slim guiding vane [16 mm]
is aligned towards the interior.
 The thermal accumulator insert has been inserted.
Slim
Standard
!
!