inVENTer 1001-0200, Installation Instructions Manual

Page: 16 / 40

16
INSTALLATION AND ASSEMBLY
16 iV-Light ventilation unit | Installation instructions
4 Installation and assembly
Read the section carefully before installation to avoid installation errors. The installation and con-
nection of the ventilation unit must be carried out by qualified personnel.
4.1 Check the scope of supply
Check the delivery for completeness and transport damage upon receipt using the delivery note.
Report missing items immediately.
These assembly instructions describe the standard version of the product.
For the scope of supply of the external terminations variants, wall sleeves for integrating the
Connect controller platform and the interior closure variants, please refer to the separately
available installation instructions for the respective system component.
Figure 6: iV-Light ventilation unit standard components
1 External termination:
Weather protection grille
1 a: Sealing tape
1 b: End-stop tape
2 Wall sleeve R-D160
2 a: Styrofoam discs
2 b: Mounting wedge set
3 iV-Light thermal accumulator insert
3 a: Insulated thermal accumulator
3 b: Standard guiding vane (45 mm)
3 c: Xenion reversible fan
3 d: Slim guiding vane (16 mm)
3 e: BUS plug connection
4 Light V-220x220 inner cover
4 a: ISO Coarse 60 % dust filter
1a
1b
4a
1
2b
2
2a
3a
3b
3c
3d
3e
3
4