Inventec N800G3, User Manual

Page: 172 / 258

B800G3 BMC Specification
- 36 -
18.9 BMC WATCHDOG TIMER COMMANDS (NETFUN: 06H, 07H)
RESET WATCHDOG TIMER APP 22H M
SET WATCHDOG TIMER APP 24H M
GET WATCHDOG TIMER APP 25H M
18.10 CHASSIS COMMANDS (NETFUN: 00H, 01H)
GET CHASSIS CAPABILITIES Chassis 00H M
GET CHASSIS STATUS Chassis 01H M
CHASSIS CONTROL CHASSIS 02H M
CHASSIS RESET CHASSIS 03H O (UNSUPPORTED)
CHASSIS IDENTIFY CHASSIS 04H O
SET FRONT PANEL BUTTON ENABLES CHASSIS 0AH O
SET CHASSIS CAPABILITIES CHASSIS 05H O
SET POWER RESTOR POLICY CHASSIS 06H O
SET POWER CYCLE INTERVAL CHASSIS 0BH O (DEFAULT : 10 SECONDS)
GET SYSTEM RESTART CAUSE CHASSIS 07H O
RESTART CAUSE
[3:0] AH= SOFT RESET
(E.G. CTRL+ ALT + DEL) - UNSUPPORT.
SET SYSTEM BOOT OPTIONS CHASSIS 08H O
PARAMETER #5 DATA3 [6:5]-FIRMWARE VERBOSITY -
BIOS UNSUPPORT
PARAMETER #7 UNSUPPORT
GET SYSTEM BOOT OPTIONS CHASSIS 09H O
PARAMETER #7 UNSUPPORT
GET POH COUNTER CHASSIS 0FH M
18.11 EVENT COMMANDS (NETFUN:04H, 05H)
SET EVENT RECEIVER S/E 00H O
GET EVENT RECEIVER S/E 01H O
PLATFORM EVENT
(A.K.A. “EVENT MESSAGE”)
S/E 02H M
18.12 PEF AND ALERTING COMMANDS (NETFUN:04H, 05H)
GET PEF CAPABILITIES S/E 10H M
ARM PEF POSTPONE TIMER S/E 11H M
SET PEF CONFIGURATION PARAMETERS S/E 12H M
GET PEF CONFIGURATION PARAMETERS S/E 13H M
SET LAST PROCESSED EVENT ID S/E 14H M