Inventec N800G3, User Manual

Page: 240 / 258

04/01/2015 Inventec Corp. Confidential 61
3.5.3. Server Mgmt
Aptio Setup Utility –Copyright © 2014 American Megatrends, Inc.
Main Advanced Server Mgmt Recovery Security Boot Save & Exit
BMC Self Test Status
BMC Firmware Revision
IPMI Version
BMC Support
Wait For BMC
Time Zone(UTC Offset)
Current Time Zone
FRB-2 Timer
FRB-2 Timer timeout
FRB-2 Timer Policy
▶
System Event Log
▶
View FRU information
▶
BMC network configuration
▶
View System Event Log
PASSED
xx.xx.xx
2.0
[Enabled]
[Disabled]
+08:00
+08:00
[Enabled]
[6 minutes]
[Reset]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1245. Copyright © 2014 American Megatrends, Inc.
Menu Fields Settings Comments
Server Mgmt
BMC Support
[Enabled]
[Disabled]
Enable/Disable interfaces to communicate
with BMC.
Wait For BMC
[Enabled]
[Disabled]
Wait For BMC response for specified time
out. In PILOTII, BMC starts at the same
time when BIOS starts during AC power
ON. It takes around 30 seconds to initialize
Host to BMC interfaces.
Time Zone(UTC Offset) +08:00
Enter UTC Offset in hours i.e. from -24:00 to
+24:00. These values will be converted into
minutes and programmed to BMC. Enter
0x7FFF to consider BIOS time as local time
FRB-2 Timer
[Enabled]
[Disabled]
Enable or Disable FRB-2 timer (POST
timer)
FRB-2 Timer timeout
[3 minutes]
[4 minutes]
[5 minutes]
[6 minutes]
Enter value Between 3 to 6 min for FRB-2
Timer Expiration value.
FRB-2 Timer Policy
[Do Nothing]
[Reset]
[Power Down]
Configure how the system should respond if
the FRB-2 Timer expires. Not available if
FRB-2 Timer is disabled.