Inventec N800G3, User Manual

Page: 83 / 258

About This Manual
2015-MNU-000009
iii
Safety Precautions
Observe the following safety precautions when you are connecting or disconnecting any
device.
•
Regarding the standards of workstation regulations, do not place the server in the visual
field of the user, because of the glossy front of the case.
•
The product is non-consumer product and for profession technical person used only.
Operation Safety
•
Any operation on this server must be conducted by certified or experienced engineers.
•
Before operating your server, carefully read all the manuals included with the server
package.
•
Before using the server, make sure that all cables are correctly connected and power
cords are not damaged. If any damage is detected, contact your dealer as soon as
possible.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
•
Before opening the chassis panels, make sure all power cords are unplugged.
•
Avoid dust, humidity, and extreme temperatures, place the server on a stable surface.
•
If the power supply is broken, do not try to fix it by yourself. Contact an authorized dealer.
•
It is recommended that you wear gloves when assembling or disassembling the server to
protect from cuts and scrapes.
•
When the server is powered on, heat sinks and the surfaces of certain IC devices may be
hot. Do not touch them. Check whether the fans are functioning properly.
Electrical Safety
•
Before installing or removing signal cables, ensure that the power cords for the system
unit and all attached devices are unplugged.
•
To prevent electric shock hazard, disconnect the power cord from the electrical outlet
before relocating the system.
•
When adding or removing any additional devices to or from the system, ensure that the
power cords for those devices are unplugged before the signal cables are connected. If
possible, disconnect all power cords from the existing system before you add a device.