Fig.2
Hole types and spacing of the mounting hub.
When mounting the ¼'' UNC thread adapter to the hub we recommend using the provided
M3 screws. Nodal Ninja comes with a set of M5 screws – it is best to use this screws to mount the
tilt head to the hub.
Fig. 3
Pano360 with Nodal Ninja
To mount Pano360 to DJI H-frame it is best to remove the carbon pipes and slide them once
again through all DJI elements and Pano360 rubber grommets (
Fig. 1-A
).
Fig. 4
Pano360 mounting to DJI H-frame.
Nodal Ninja
¼
''
U
N
C
a
d
ap
te
r
