Excelerator XLT Series
52
Part No. 1114850
REAR SAFETY LIGHT (FIGURE 3)
WARNING
WARNING
WARNING
WARNING
WARNING
Operation of the handcycle is subject
to all traffic rules and regulations.
(This may include the use of a safety
light and reflectors for dusk/night
riding.)
BATTERIES
1. Remove the lens cover.
2. Insert the
AAA
batteries with correct
polarity (+ or -).
3. Reinstall lens cover.
MOUNTING THE SAFETY LIGHT
1. Remove the set screw from the clamp on the safety light.
2. Position the clamp onto the rear seat post as shown in FIGURE 3.
3. Install the set screw into the clamp and tighten securely.
OPERATING THE SAFETY LIGHT
1. Press
GREY
button for
ON/OFF
.
2. Remove lens cover and slide switch back and forth for pulse or constant mode.
TOW BAR INSTALLATION AND USE (FIGURE 2)
NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid
wheelchairs with a tubular style footrest can be towed using the tow bar.
1. Remove the two (2) set screws on each tow bar mounting bracket.
2. Attach the tow bar to the rear frame of the handcycle.
NOTE: Make sure that the tow bar is centered on the rear handcycle frame.
3. Secure the tow bar to the handcycle with the mounting brackets and set screws.
4. Secure the wheelchair to the tow bar with the fastening strips provided.
Tow Bar
Mounting Bracket
Set Screws
Rear Handcycle
Frame
FIGURE 2 - TOW BAR INSTALLATION
Fastening
Strip
Clamp
Rear Seat Post
Safety Light
Lens Cover
FIGURE 3 - REAR SAFETY LIGHT
NOTE: Rear wheels removed for clarity.
Set Screw
SECTION 8
OPTIONS
OPTIONS
All manuals and user guides at all-guides.com