Part No. 1114850
15
Excelerator XLT Series
STEP A:
Shift body weight to the edge of the
wheelchair upholstery closest to the handcycle.
STEP F:
Place both legs onto
handcycle footrests and secure
safety straps.
FIGURE 1 - TRANSFERRING INTO/OUT OF A WHEELCHAIR*
STEP E:
Lift and shift weight
down into handcycle seat.
STEP D:
Place
RIGHT hand on the
wheelchair frame.
STEP C:
Place LEFT hand on the left
side of handcycle seat frame, NOT on
hand crank.
STEP B:
Lift and
place LEFT leg past
front frame across
seat and over
center tube.
WARNING
If installed, parking brake
MUST be secured.
WARNING
Wheel locks MUST be
engaged if installed.
Hand Crank
(positioned toward the front
of the handcycle)
Seat Frame
Footrest
WHEELCHAIR
HANDCYCLE
*NOTE: The steps in FIGURE 1 are specifically for transfer to/from a wheelchair and do not
correspond to the steps in the procedure on the previous page. Follow a similar procedure to
transfer to/from an object other than a wheelchair. Refer to the steps on the previous page for
more information.
NOTE: Excelerator shown for clarity.
SECTION 1
GENERAL
GUIDELINES
GENERAL GUIDELINES
All manuals and user guides at all-guides.com