Excelerator XLT Series
10
Part No. 1114850
PROPER FIT
WARNING
The handcycle MUST be adjusted to fit the rider. For a proper fit:
The rider MUST be able to see over the hand crank.
The rider MUST have a slightly bent elbow when the hand pedals are
toward the front of the handcycle (farthest from the rider's face).
The rider MUST have a slight bend at the knee when feet are in the
footrests. Feet should be flat against footrest hoop.
XLT Series requires a 18' turning radius. If leg touches tire during turn
and user cannot sense this, a leg guard attachment is recommended.
The rider's knees MUST not obstruct hand crank operation.
Check the seat position, back angle, quick-release on threaded axles,
footrest fore/aft position, hand crank height for proper fit and smooth
operation of your handcycle.
OPERATING INFORMATION
WARNING
Wear your helmet at ALL times when riding the handcycle.
Before riding your handcycle, check your brakes. Be sure that the brakes
and all other features of your handcycle are operating properly.
ALWAYS keep fingers or hands AWAY from the chain while pedaling.
DO NOT let children play near the handcrank or the chain. Otherwise,
injury or damage may occur.
The user is responsible for normal upkeep and maintaining the handcycle
in proper operating condition.
The manufacturer is not responsible for failure, damage or injury caused
by improper operation or maintenance by the end-user.
To determine and establish your particular safety limits, practice
transferring activities in the presence of a qualified health care
professional BEFORE attempting active use of the handcycle.
Section 1 - General Guidelines - includes the following:
Proper Fit
Operating Information
Tire Pressure
Weight Limitation
Safety/Handling of the Handcycle
Transferring Into/Out of the Handcycle
SECTION 1
GENERAL
GUIDELINES
GENERAL GUIDELINES
All manuals and user guides at all-guides.com