Invacare ScanBed 755, User Manual

Page: 16 / 274

19
A B
C
GB
Mounting the Line side rail
1. Mount one end at a time. Lift the
upper bar (the release buttons
must face up/outwards)
(A) .
2. Press the locking pin at the end
of the side rail with a finger.
3. All three gliding shoes at the end
of the bars are guided into
the bed end rail, until the lower
bar has been locked, thereby
preventing the side rail from falling
down
(B) .
4. Repeat points 2 and 3 when mounting
the other end of the side rail.
Warning! To avoid entrapment/suffocation or accidental fall accidents
from the mattress support, it is essential that the gliding shoes are correctly
guided into the bed end rails. Adjust the side rail bars by hand, to ensure they
are mounted correctly.
Dismounting the Line side rail
1. Lower the side rail.
2. Dismount one end at a time.
Lift the lower bar, so that the
spring pawl is visible.
3. Press the spring pawl with a key
or a screwdriver (
C ).
4. Hold the lower bar. Lower the
side rail, until all three bars are
free of the bed end rail.
5. Repeat points 2 to 4 when dismoun-
ting the other end of the side rail.
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 19 2011-11-08 15:24:03