Invacare ScanBed 755, User Manual

Page: 23 / 274

26
5.
6.
7.
Assembly
1. Make sure that the castors have their brakes activated.
2. The side rails and bed ends are removed from the transport hooks.
3. The transport hooks are folded up, and the distance rod is
folded in.
4. Plug the mains cord into the socket outlet.
5. Run the bed to the marked height level, so that the
cams on the base frame’s guide way and the shear
arms are opposite each other.
6. Place the head section at control unit end of the
base, and tip the head section, so the sliding shoes
are guided into the guideways.
7. Place the leg section, so that the two snap locks
are guided into the two pivots on the shear arm,
after which the leg section is tipped to horizontal.
It is essential that the snap locks are engaged and
locked, and that the inserts are located opposite
to the openings in the head section.
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 26 2011-11-08 15:24:26