Invacare ScanBed 755, User Manual

Page: 11 / 274

14
3
1
2
4
9
14
7
5
6
8
12
13
11
16
15
17
10
Operating the built-in mattress support extension
The SB755
TM
can be extended respectively 5 and 10 cm in both head- and foot end, 20 cm
in total. To be able to extend the bed, the hexagonal key must be used.
The key is located on the inner side of the cross bar in the head end.
To extend the bed in the foot end, the following must be done:
1. The side rail is removed (see section 5).
2. Remove the two screws that holds the bed end bracket in the bed foot end by the use of
the hexagonal key.
3. Pull out the bed end brackets 5 or 10 cm, and install/tighten both screws.
4. Loosen both screws that holds the mattress support extension, pull out the extension to
desired position, and tighten both screws.
5. Replace the mattress or put in the mattress extension.
6. Install the side rail(s).
1. Allen key
2. Backrest
3. Seat
section
4. Leg section motor
5. Thigh section
6. Thigh section motor
7. Leg section
8. Top frame, foot end
9. Brake pedal for beds
provided with central
brake
10. Brake for beds provided
with brake castors
11. Base frame
12. Backrest motor
13. Shear arms
14. Top frame, head end
15. Control
unit
16. Mattress retainer
17. Mattress support
extension
Accessories
Bed ends
Bed end fittings
Support handles
Side rails
Lifting pole
Bumper wheels
ACP box
Limitation crossbar
for leg end
Backup battery
Parts of a standard bed
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 14 2011-11-08 15:23:52