Invacare Polaris EX CPAP with SoftX ISP3000 Operator'S Manual Download

Page: 40 / 44

SECTION 11—TROUBLESHOOTING

Invacare® Polaris™EX™

Part No 1110559

Insufficient air deliv-

ered from CPAP unit.

Therapy Delay function is

in use.

Wait for air pressure to

come on gradually,

according to the selected

delay period. (Refer to

Operation on page 26).

Or from Standby mode

press the Enter button

twice.

Blocked or dirty air filter. Remove blockage, clean

or replace if dirty. (Refer

to Maintenance on

page 35.)

Air tubing is kinked or

punctured.

Straighten or replace air

tubing.

Air tubing is not con-

nected properly.

Tighten air tubing connec-

tors at both ends.

RAMP (therapy delay

time) not functioning

Your clinician may not

have provided a therapy

delay time greater than

zero.

If unit operates only in

Standby or Normal ther-

apy modes, call physician

and request delay time.
See how to adjust the

ramp timer setting. Refer

to Changing the RAMP

Timer on page 29.

Error code “xxx” is

displayed in LCD win-

dow and device is

inoperative.

Internal device error.

Unplug power cord, wait

several seconds and

reconnect firmly.
If error message is still

displayed, contact your

home healthcare pro-

vider IMMEDIATELY.

SYMPTOM

PROBABLE CAUSE

SOLUTION

Summary of Contents for Polaris EX CPAP with SoftX ISP3000













































Search results

Summary of Contents for Polaris EX CPAP with SoftX ISP3000

Reviews:

Related manuals for Polaris EX CPAP with SoftX ISP3000

Brands by name

Popular brands

Invacare Polaris EX CPAP with SoftX ISP3000, Operator'S Manual

Search results

Summary of Contents for Polaris EX CPAP with SoftX ISP3000

Reviews:

Related manuals for Polaris EX CPAP with SoftX ISP3000

Brands by name

Popular brands