manualshive.com logo in svg

Invacare Polaris EX CPAP with SoftX ISP3000, Operator'S Manual

Share
Download
Invacare Polaris EX CPAP with SoftX ISP3000 Operator'S Manual Download Page 26

SECTION 7—OPERATION

Invacare® Polaris™EX™

26

Part No 1110559

SECTION 7—OPERATION

Preparing for Treatment

NOTE: Prior to each use, inspect the CPAP unit, air tubing, and 

mask for damage, failure, or worn parts. Contact your home 

healthcare provider if evidence of such is present.

1. Ensure that the Polaris EX CPAP unit power cord is 

plugged into a 120 VAC (60 Hz) power outlet.

2. When the Polaris EX CPAP unit is first plugged in:

A. The software version number will be displayed on the 

LCD display window for approximately one (1) 

second.

B. The CPAP will display the current CPAP pressure 

setting and RAMP Start Pressure for approximately 

two (2) seconds (display shows pressure units in cm 

H

2

O).

C. “STANDBY” will then appear on the LCD display 

window.

NOTE: The CPAP power indicator light will be lit whenever there 

is power to the CPAP.

3. If no button has been pressed for 30 seconds, the display 

intensity will diminish. 

 

WARNING

A mask should NEVER be fully connected to the unit and 

worn while the CPAP unit is in the STANDBY mode.
DO NOT attach the air tubing to the mask before treat-

ment.

Summary of Contents for Polaris EX CPAP with SoftX ISP3000













































Reviews:

No comments

Brands by name

Popular brands

Load more brands