SECTION 7—OPERATION
Invacare® Polaris™EX™
30
Part No 1110559
7. Press the down ( ) button to cancel the changes. The
following message will be displayed for two (2) seconds,
“CHANGES IGNORED!”, and the unit will exit to
Standby mode.
Changing the
SoftX Setting
NOTE: Refer to How SoftX Works on page 16 for more information
about the SoftX feature.
1. While in Standby mode, press the up ( ) button for
approximately four (4) seconds.
2. Press the up ( ) button to select the “User Settings”.
3. Press the Enter button until SoftX is displayed.
4. Press the up ( ) or down ( ) buttons to scroll through
the available SoftX settings.
5. Press the Enter button to accept the new SoftX setting.
6. Continue to press the Enter button to scroll through the
other menu items, if changes have been made, a
confirmation screen will appear.
7. Press the up ( ) button to confirm the changes. The
following message will be displayed for two (2) seconds,
“CHANGES CONFIRMED!”, and the unit will exit to
Standby mode.
8. Press the down ( ) button to cancel the changes. The
following message will be displayed for two (2) seconds,
“CHANGES IGNORED!”, and the unit will exit to
Standby mode.
NOTE: If no button is pressed for two (2) minutes or more, the unit
automatically exits to Standby mode and no changes will be saved.
