Operation Manual 7310 EPSHP
30
7. USING THE CUTTER
The user is obliged to create working conditions at the cutter workplace that preclude the
operator from slipping or falling due to poor ground conditions, cable routing the wires or lack
of convenient access!
7.1 Work area for operational staff
The working area is the front side of the (operational) cutter!
7.2 Danger zones in the cutter
•
knife and clamp zone
•
back side of the cutter frame (access to clamp zone and knife)
•
back side of the cutter (access to the backguage)
•
bottom side of the rear table access to the backguage zone (spindle and slider)
7.3 Starting up the cutter
INFO
During the first start-up, pay attention to the correct connection of the cutter
to the network.
7.3.1 Commissioning
Figure 15 Arrangement of the elements used when switching the cutter.
Summary of Contents for INT-GU-07310EPSHP
