Intimus INT-GU-07310EPSHP, Operation Manual

Page: 54 / 85

Operation Manual 7310 EPSHP
54
8.4 Adjusting the parallelism of backguage
Depending on the required inclination of backguage, it must be adjusted using drawings 42
and 43.
Figure 42 How to remove the cover
To adjust backguage:
8.4.1 unscrew the screws 1 (fig.42)
8.4.2 remove the cover 2 (fig.42)
8.4.3 loosen the screws 1 (fig.43)
8.4.4 loosen the nuts 2 (fig.43)
8.4.5 by turning the screws 3, place the backguage 4 (Fig. 43) at the right angle
8.4.6 lock the adjustment screws with 3 nuts 2 (fig.43)
8.4.7 firmly tighten the screws 1 (fig.43)
After the cutting attempt, repeat the adjustment until the parallel cutting is achieved.