Operation Manual 7310 EPSHP
24
5. OPERATION
5.1 Operating safety
5.1.1 Safety instructions
•
Before each start-up or start-up on the cutter, the next change should be made to
ensure that the safety components are complete and work properly.
•
The cutter can only be operated if all safety components and safeguards such as
detachable covers, emergency stop switches are installed and fully functional.
•
In the event of a malfunction, stop the cutter immediately and block it.
•
All defects must be eliminated immediately.
5.1.2 Warning about special hazards
You should refrain from performing any actions that infringe safety in the machine.
In particular, it is prohibited to:
•
Putting your hands into the field of knife and pressure.
•
Putting hands in the field between the clamping and infeed bars.
•
Exercise extreme caution when handling the knife! Use transport handles when
installing / removing / carrying the knife.
•
Use only undamaged and sharp knives!
•
The knife can only be changed by trained personnel.
•
When cutting on the work table, there must be no objects (such as keys,
screwdrivers)
5.2 Control system
DANGER!
The machine cannot be operated with defective photocells forming the safety
curtain!
Summary of Contents for INT-GU-07310EPSHP
