101
CD
SAVE THESE INSTRUCTIONS
Page 26
(101CD) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.5” PANTONE 295U 12/06/2007
INSUFFICIENT
CHLORINE
WHITE FLAKES IN
THE WATER
NO LED DISPLAY
• Insufficient operating hours of
the Saltwater System.
• Insufficient (Less than
2000 ppm) salt level in pool
water.
• Chlorine loss due to intense
sunlight exposure.
• The bather load has increased.
• Clogged or dirty electrolytic cell.
• Excessive calcium hardness is
present in pool water.
• Power Saving Mode.
• No power supply.
• Electrolytic cell cord is loose.
• Power fuse blown.
• LED failure.
• Increase the Saltwater System
operating time per day. See “Operating
Instructions”.
• Test the Salt Level with Test Kit, and
adjust as needed. See “Salt & Pool
Water Volumes”.
• Use Pool Cover when the pool is not
use and/or when the unit is operating.
• Increase the Saltwater System
operating time per day. See “Operating
Instructions”.
• Remove the cell for inspection, clean it
if necessary. See “Maintenance”.
• Drain about 20 to 25% of the pool
water and add fresh water to decrease
the calcium hardness. Visually inspect
the electrolytic cell for scale build-up
and clean the electrolytic cell if
necessary.
• Press any button ( or ) to view
the last LED code.
• Check for power cord loose or not
connected properly.
• Check to see if cell cord is loose or not
connected properly. Ensure the cell
cord is plugged firmly into the cell
housing receptacle.
• Contact Intex Service Center for
replacement.
• Contact Intex Service Center for
replacement.
TT
RR
OO
UU
BB
LLEE
SS
HH
OO
OO
TT
IINN
GG
GG
UU
IIDD
EE
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
REMEDY
IMPORTANT
If you continue to experience difficulty, please contact our Consumer
Service Department for assistance. See back cover for contact
information.
