101
CD
SAVE THESE INSTRUCTIONS
Page 19
(101CD) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.5” PANTONE 295U 12/06/2007
OPERATION INSTRUCTIONS (continued)
OO
PP
EE
RR
AA
TT
IINN
GG
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
5.
Operating hours can be re-adjusted if necessary. Follow steps 2 thru 4.
6.
The scheduled operating hours displayed on the LED readout will decrease to
zero as the unit operates. The LED shows “hours remaining” in the daily
operating cycle.
7.
The green LED light on the control panel will disappear when
the cycle has ended. The system will go into a “Stand-By
Mode” with the LED flashing “93”. The system automatically
goes into a “Power Saving Mode” and will automatically turn
itself back on in 24 hours to continue its daily chlorine
production.
8.
The LED will be become blank after 1 hour indicating the
Saltwater System is dormant (Power Saving Mode) waiting for
the next startup cycle to begin. Press any button ( or )
to view the last LED code.
SPECIAL NOTES
•
Always use a test strip to test the chlorine level before entering or using the
pool. If the chlorine level is too high, wait until the chlorine level drops
below 3 ppm before using the pool or operating the Saltwater System
again.
•
IMPORTANT: Never use the pool if chlorine level is more than 3 ppm. Do
not operate Saltwater System while the pool is in use or occupied.
•
If a power outage occurs or the power cord is unplugged then the Saltwater
System operating hours will have to be reset.
Heavy pool usage, and higher temperatures may require higher chlorine output to
maintain proper free available chlorine residuals.
WARNING
