INTERSPORT ENERGETICS PR 11.0, Manual

Page: 5 / 121

5
1. Please note that this treadmill need at least
2 people to finish assembly.
2. Open the carton box, and take out all the
protection foam and assembly parts.
3. As the photo shows, take out the running
deck from the box, lay it on the flat floor, and
then cut the belt.
Tips: The console plastic housing is packed in
a box, which put under the running deck.
Please take care of it when taking out the
running deck.
STEP 1
STEP 2
1. Lift up the left and right upright,and then use the 6#
wrench (18) to install each upright onto base with 2 pcs
M10x55 bolt (8) and 2 pcs flat washer (13), 2 pcs
M10x20 bolt (9) and 2 pcs M10 washers (13) on the
other side.
2. Do not tightly fasten all the bolts and screws at this
step
.