Thrii
Installation
Page
3
of
23
All information including dimensions, changes in design and material are subject
to manufacturer’s change without formal notice and without obligation. Intersan
assumes no responsibility for use of superseded or voided information. Verify all
rough-in information before installation. It is the responsibility of the installer to
conform with local and national codes.
Intersan Manufacturing Company
1748 West Fillmore St., Phoenix, AZ 85007
Phone: 800-999-3101 Fax: 602-254-1776
intersanUS.com
THRII-inst-Rev1
by
2.4
Numbered procedures
Steps in procedures are numbered, starting from 1.
1. This is step 1.
2. This is step 2, etc.
2.5
Bullet lists
A bullet list is used to give information that is not necessarily in sequential order.
2.6
Menu items
Menu items, submenu items and settings, where available, are given in
bold
.
3.
Glossary
The glossary lists all words, abbreviations and technical terminology used in this manual, along with a short description of
these terms.
Term
Description
Thrii®
Hand Wash Unit
Engine Unit
The Engine Unit refers to the complete soap,
water, dryer module mounted on the back of
the fascia.
IR Sensor
The infrared (IR) sensor transmits an invisible
beam into the washbowl area, so that when
interrupted by a person's hand the beam is
rebounded back to the receive sensor. This
creates an electrical signal which rapidly
activates the hand wash cycle.
FNPT
Female National Pipe Thread
Solid Surface
The term Solid Surface refers to the hard
granite-effect or solid color material that is
molded to form the Thrii fascia.
Power up
The external electricity supply is provided to the
Thrii.
