Thrii
Installation
Page
15
of
23
All information including dimensions, changes in design and material are subject
to manufacturer’s change without formal notice and without obligation. Intersan
assumes no responsibility for use of superseded or voided information. Verify all
rough-in information before installation. It is the responsibility of the installer to
conform with local and national codes.
Intersan Manufacturing Company
1748 West Fillmore St., Phoenix, AZ 85007
Phone: 800-999-3101 Fax: 602-254-1776
intersanUS.com
THRII-inst-Rev1
by
6.5
Engine installation
1.
Remove the engine cover, retaining the engine cover fixing.
2.
Remove the securing pin out through the side from the base of the engine.
3.
Present the engine to the engine mounting plate on the back of the fascia locating the dispensing nozzle into the
aperture provided. Align the engine on the plate and click into place.
4.
Replace the securing pin through both mounting plates and engine ensuring it passes fully through this assembly.
