Thrii
Installation
Page
17
of
23
All information including dimensions, changes in design and material are subject
to manufacturer’s change without formal notice and without obligation. Intersan
assumes no responsibility for use of superseded or voided information. Verify all
rough-in information before installation. It is the responsibility of the installer to
conform with local and national codes.
Intersan Manufacturing Company
1748 West Fillmore St., Phoenix, AZ 85007
Phone: 800-999-3101 Fax: 602-254-1776
intersanUS.com
THRII-inst-Rev1
by
6.7
Commissioning for use
To commission the Wallgate Thrii:
1.
Ensure the engine cover is securely fitted and the electrical plug is fully pushed in.
2.
Fully open the water supply valve to the unit. Check the system for external leaks. If no leaks, open the water valve on
the support frame.
3.
Close the fascia, ensuring it closes fully against the wall. Adjust the hinges if required and push the fascia to the closed
position ensuring the locking bar engages fully.
The unit should only be operated with the fascia in the fully closed position and the waste outlet engaged.
Failure to do so may result in leakage.
4.
Switch ON the circuit breaker to power up the circuit, which will turn on the Thrii, making the unit ready for use.
½”
NPT
Cold water supply
