Interroll Pallet Control PC 6000
Version 2 (02/2020) en
Translation of original operating instructions
5
Introduction
Information about the manual
The following Pallet Control types are described in these operating instructions:
• Interroll Pallet Control PC 6000 max. 3 A
• Interroll Pallet Control PC 6000 max. 10 A
In the rest of this document, the designations "PC 6000" or "control system" will be used as an
alternative. For Pallet Drives and gear motors, the designation "drive" will be used as an
alternative.
Contents
This instruction manual contains important notes and information about the various operating
phases of the Pallet Control.
The instruction manual describes the product as it is delivered by Interroll.
In addition to this instruction manual, special contractual agreements and technical documents
apply to special versions.
The manual is
part of the product
4
For trouble-free, safe operation and compliance with possible warranty claims, read the
manual first and follow the instructions.
4
Keep the manual close to the product.
4
Pass the manual on to any subsequent operator or owner.
4
NOTICE! The manufacturer does not accept any liability for faults or defects due to
non-observance of this instruction manual.
4
If you have any questions after reading the operating instructions, please contact the Interroll
customer service. Contact persons close to you can be found on the Internet under
www.interroll.com/contact.
Warning notices in this manual
Warning notices refer to risks that may arise while using the product. They are structured
according to the following model:
DANGER
Nature and source of the hazard
Possible consequence of not observing the warning
4
Information about how to prevent the hazard.
