InterNEC I7-H0704/08/16Vh User Manual Download Page 92

Page: 92 / 192

User Manual of Digital Video Recorder

Click button

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

Figure 7. 6

Result of Normal Video Search for Backup

Export.

Click

and start backup.

Note:

If the inserted device is not recognized:

•

Click

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device. USB writer and DVD-R/W cannot

be formatted.

Figure 7. 7

Export by Normal Video Search using USB Flash Drive

Summary of Contents for I7-H0704/08/16Vh

































































































































































































Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Brands by name

Popular brands

InterNEC I7-H0704/08/16Vh, User Manual

Search results

Summary of Contents for I7-H0704/08/16Vh

Reviews:

Brands by name

Popular brands